In general, the small accessories and accessories on the large copper cylinder are separately made and then installed. For example, some copper cylinders have lion, dragon and other accessories, which are added later. Therefore, the process of casting copper cylinder is not very complicated, but the accessories above are meticulous work. Because the accessories are relatively delicate, the workmanship requirements are relatively high. During casting, from the beginning of mold making to the final grinding, each link requires high technology. In actual production, only experienced old foundry workers are allowed to make them Make these exquisite parts.
Copper VAT is relatively heavy. Generally, bronze is used for casting, and red copper is also used, but it is relatively few. The technical requirements for the main body of large copper vat are not very high. As long as there is no problem with the plastic mold, there will be no other technical problems basically. It is OK to be more careful when casting. After casting, the exquisite parts are welded to make a successful handicraft.
Huifeng sculpture arts and crafts Manufacturing Co., Ltd. is a sculpture manufacturer specializing in the production and manufacture of large copper vats and antique copper vats. Since the establishment of our factory, we have more than 10 years of production experience in the production of copper vats, antique copper vats and Imperial Palace copper vats. We can say that we are professional and powerful in the casting of copper vats.